Industrie
Traitement des eaux de production pétrolière et gazière
Solutions de traitement pour les eaux de production, le reflux de fracturation et les déchets de forage dans les opérations pétrolières et gazières canadiennes et américaines.
🤖 Aperçu IA
Les eaux de production pétrolière et gazière contiennent des hydrocarbures, des sels, des métaux lourds et des produits chimiques de production qui nécessitent un traitement spécialisé avant l'élimination ou la réutilisation. BioTerraVa conçoit des trains de traitement qui atteignent la conformité NPDES ou la qualité de réutilisation tout en gérant la salinité élevée et les débits variables caractéristiques des eaux de production.
Défis industriels
Produced Water Treatment Challenges
Produced water volumes increase as oil and gas wells mature, with water-to-oil ratios reaching 10:1 or higher. This water carries dissolved salts (up to 300,000 mg/L TDS), hydrocarbons, heavy metals, and production chemicals that complicate treatment.
- High salinity (TDS 10,000-300,000 mg/L) limiting biological treatment options
- Variable oil content (free, emulsified, dissolved) requiring multi-stage separation
- Heavy metals (barium, strontium, radium) from formation water
- Production chemicals (corrosion inhibitors, biocides, scale inhibitors)
- High disposal costs for deep-well injection or evaporation ponds
Solutions BioTerraVa
Produced Water Treatment Solutions
BioTerraVa designs produced water treatment systems tailored to the specific characteristics of your field: salinity, oil content, metals profile, and discharge requirements. Our designs prioritize water reuse for enhanced oil recovery or irrigation where feasible.
- API separators and corrugated plate interceptors for free oil removal
- DAF or induced gas flotation for emulsified oil separation
- Filtration and adsorption for dissolved organics and metals
- Evaporation/crystallization for zero liquid discharge where required
- Reuse treatment for enhanced oil recovery or irrigation
Conformité
Oil & Gas Discharge Regulations
Produced water discharge is regulated under NPDES permits (USA), provincial oil and gas regulations (Canada), and local disposal well requirements. Key parameters include: oil & grease < 15 mg/L, TSS < 30 mg/L, and site-specific metals limits.
- US EPA NPDES permits for surface water discharge
- Alberta Energy Regulator (AER) Directive 058 for disposal wells
- Ontario Regulation 537/93 for industrial sewage works
- Underground Injection Control (UIC) permits for deep-well injection
- State/provincial water quality standards for receiving waters
Étude de cas
Shale Gas Operation Reduces Disposal Costs by $1.2M/Year
Problème : A shale gas operation in Alberta was spending $3.5M annually on deep-well disposal of 2,000 m³/d of produced water. Regulatory uncertainty around disposal well expansion threatened future capacity.
Solution : BioTerraVa designed a treatment train: API separator + DAF + walnut shell filtration + RO. The RO permeate was reused for hydraulic fracturing, reducing freshwater purchases by 70%.
Résultats : Deep-well disposal reduced from 2,000 m³/d to 400 m³/d. Annual disposal cost savings: $1.2M. Freshwater purchase reduction: $800K/year. Payback period: 2.5 years.
Obtenez une évaluation gratuite pour votre installation
Parlez avec un ingénieur principal au sujet de vos défis d'effluents spécifiques.
Réservez une consultation gratuite de 30 minutes →Ressources connexes
Technologies
FAQ
Questions fréquemment posées
What is produced water in oil and gas?
Produced water is the water that comes to the surface along with oil and gas during production. It typically constitutes 70-90% of total fluids produced from mature wells. Produced water contains dissolved salts, hydrocarbons, heavy metals, and production chemicals. Volumes range from a few barrels to over 10 barrels of water per barrel of oil, depending on field maturity and geology.
How is produced water treated?
Produced water treatment typically involves: (1) Primary separation (API separators, CPI) for free oil, (2) Secondary treatment (DAF, IGF) for emulsified oil, (3) Filtration for suspended solids, (4) Desalination (RO, evaporation) for TDS reduction if reuse is targeted, and (5) Disinfection if discharge is required. Treatment complexity depends on salinity, oil content, and discharge requirements.
What are the disposal options for produced water?
Produced water disposal options include: (1) Deep-well injection into permitted disposal wells, (2) Evaporation in engineered ponds, (3) Discharge to surface waters with NPDES permits, (4) Reuse for enhanced oil recovery (EOR) or hydraulic fracturing, and (5) Treatment for irrigation or livestock water. BioTerraVa evaluates all options based on regulatory constraints, economics, and sustainability goals.
Parlez avec un P.Eng. qui fait cela depuis 36 ans
Domestique ou industriel, municipal ou communauté autochtone — la première consultation de 30 minutes est gratuite.
Réservez votre consultation gratuite →